Advanced Industrial Electrical Systems Kit

The Advanced Industrial Electrical Systems Kit is a professional solution designed for learning advanced wiring, control, and command techniques for industrial electrical systems.

This kit consists of:
• 1 sectionable three-way fuse holder for fuses
• 6 fuses, 6 A
• 1 mushroom-head emergency button, 1 NO + 1 NC, 10A – 250Vac
• 3 buttons of different colors, 1 NO + 1 NC, 10A – 250Vac
• 1 red pilot lamp, 22 mm diameter, 24 Vac
• 1 green pilot lamp, 22 mm diameter, 24 Vac
• 1 yellow pilot lamp, 22 mm diameter, 24 Vac
• 5 three-pole contactors, 25 A – 400 Vac, 24 Vac coil
• 5 auxiliary contacts, 2 NO + 2 NC, 10 A – 250 Vac
• 1 thermal overload relay, 4.5 – 7.5 A, 1 NO + 1 NC, 10 A – 250 Vac
• 2 on-delay timers, 0.1-30s
• 2 off-delay timers, 0.1-30s
• 1 single-phase transformer, 230/24V, 30 VA
• 2 enclosures for 3 push-button/pilot-lamp operators
• 30 M4 x 10-20 mm screws with nuts
• 2 pieces of 50 cm DIN rail for mounting components

Training program:
• Single-point control of a contactor
• Pulse control of a contactor
• Independent control of two contactors
• Interlocking between contactors
• Thermal overload relay
• Manual star/delta starting
• Manual reversing switch
• On-delay timer
• Off-delay timer
• Polarity reversing switch for dual-winding motor
• Speed control for Dahlander motor
• Speed control and reversing switch for Dahlander motor
• Counter-current braking
• Remote reversing switch, star/delta starter

Some accessories not included but recommended:
• 1 tool kit
• 1 cable lug crimping pliers
• 5 coils, 100 m, 1.5mm² cross-section (grey/blue/brown/black/yellow-green)
• 1 junction box
• 1 component mounting panel
• 1 bench-mounted panel frame
• 1 two-speed three-phase squirrel-cage asynchronous motor – DAHLANDER

Furthermore, thanks to the inclusion of components widely used in industry, the advanced industrial electrical systems kit promotes hands-on learning that is directly applicable to the relevant sectors.

IT.0361.IE-A